Overall Idea

Okay, I figured if we didn't get the part in time, I'd at least show what we had in mind with this project. Here I posted just a pencil and paper sketch of everything. There are two arduinos, a servo, LED lights, and a pig. The pig is the object we wanted to have 3d printed/laser cut. on the top is listed with the things mentioned above and below is how we were going to set everything up. The servo would rotate the made part above the pulsating LED lights to make it look like its roasting.

Cheesy, we know.


Here is a link to our google drive which contains the two solidworks parts we made for this project:
https://drive.google.com/folderview?id=0Bw29l4qYnW1QX0gzU3hqSXBQRUE&usp=sharing